Lightmaxx VEGA ZOOM Wash Beam, Руководство пользователя

Страница: 18 / 25

ENGLISH
Commissioning:
All connections of the device should be made before switching on. Only use high-quality cables
that are as short as possible for the connections.
Configuration of the DMX connector:
Resistance 120 ohm 1/4w between pin 2 (DMX-) and pin 3 (DMX+) oft he last fixture.
Operating mode DMX:
Connect the DMX input of your device to the DMX output of your DMX controller, your DMX
software or the DMX output of a device already in your DMX chain. Always use a DMX cable
with a 110 Ohm resistor for this connection. Address the device according to your DMX
configuration. The device has a DMX mode with 16 channels, which are based on the following
functions: