MANUALFOR SMART LED BULB
Product name
：
SMART LED BULB
Model
Rating
Current
(mA)
Base
Power
(W)
GU10 W 5W 120V
120V~
60Hz
70
GU10
5
GU10 CCT 5W 120V
70
GU10 RGB+W 5W 120V
70
GU10 RGB+CCT 5W 120V
70
C37 W 5W E12
70
E12
C37 CCT 5W E12
70
C37 RGB+W 5W E12
70
C37 RGB+CCT 5W E12
70
The products are not designed for use in
：
-For safety reasons, do not open device, doing this will void the warranty.
-Onlyusetheadaptorsupplied; usingaditferentadaptorcandamage thedevice.
-Only use this bulb in a socket that israted for this bulb.
-This device is not designed to be pl
a
yed with by children like a toy.
-Do not place the device on hot surfaces.
- Before replacing, turn off power and let the bulb cool to avoid electrical shock or burn.
-Risk of electric shock.
-Do not use device where directly exposed to water.
-The device is for indoor use only.
-Do not use the device in wet locations, e.g. bathrooms or outdoors.
While using this product :
-Switch off the power supply to the socket and allow sufficient time for the bulb ta cool before removing
the bulb from the fitting.
-Do not clean the device when itis on and connected to the power supply.
-Remove the water proofing silicone sleeve from outdoor capable bulbs when using themindoors.
-Donot open device, as this will void the warranty.
-To avoid scratching the device, clean only with a soft dry cloth.
-Donot use cleaning agents to clean the device.
CAUTION:
SUITABLE FOR DAMP LOCATION
DO NOT USE WITH DIMMERS
NOT FOR USE IN TOTALLY ENCLOSED LUMINAIRES
THIS LAMP IS NOT INTENDED FOR USE WITH EMERGENCY EXITS
ATTENTION:
ADAPTÉ À L'EMPLACEMENT
NE PAS UTILISER AVEC DES GRADATEURS
NE CONVIENT PAS À DES LUMINAIRES TOTALEMENT FERMÉS
NE CONVIENT PAS AUX SORTIES DE SECOURS
Wireless Specification
:
-Wireless RF mode frequency band:2412 MHz ~ 2462 MHz
-Wireless communications protocol: 802.11b/g/n