Lightmaxx LIG0016088-000, Руководство пользователя

Страница: 22 / 33

22
DEUTSCH
ENGLISH
DMX connection
To ensure a perfect DMX connection, use only 3 or 5 pin DMX cables with a characteristic impe-
dance of 120 Ohm.
Installation
This spotlight can be installed in any position on the stage using the enclosed Omega brackets and
optional brackets (Half Coupler, Selflock Hook).
Each of the two Omega Brackets is equipped with 2 Quicklocks.
Rotate these clockwise to attach the brackets.
To reopen the clasp, turn it counter clockwise.
Note:
Two Omega brackets are needed to install the headlight. These are included,
Warning:
Secure the spotlight with a steel safety cable.
Install the safety at the safety eyelet provided for this purpose.
Function modes
1. Set the DMX address
By selecting „ADDR“ in the main menu, you can set the desired DMX address between 1 and 512.
Confirm your selection by clicking on the encoder wheel or confirm via the touch screen.
2. Set the operating mode
By selecting „WORK MOD“ in the menu, you can set the operating mode.
The spotlight contains 3 operating modes: DMX MODE, AUTO RUN and SOUND MODE.
The parameters can be set as follows:
DMX Mode:
In this mode the spotlight can be controlled via DMX.
AUTO RUN: In this mode, the spotlight activates the automatic programs
stored on the unit. The DMX mode is deactivated in AUTO RUN.
SOUND Ctrl:
In this mode, the spotlight reacts to loud noises, e.g. The beat
of the music. If no music is running, the unit remains in the
last scene used. The DMX mode is deactivated in the
SOUND Ctrl mode.
3. M/S Choose
In this mode, the master / slave option of the device can be activated or deactivated.
4. Lamp Control
In this mode, the lamp of the spotlight can be manually turned on or off.
Once the light is switched off, the power-on function is disabled for 30 seconds to protect the light
source.
5. Channel Mode
In this mode you can choose between 2 different channel modes:
Sample (Simple Mode) or Extend (Advanced Mode)