Lighting Technologies 1997015290, Руководство пользователя, Страница: 6 / 13

9. Connect mains cable to terminals block according to polarity L1, N1, ground.
10. Connect the power supply wires which provide continuous battery charging to contact clamps
L2, N2. Note: external module's weight doesn't exceed 1,0 kg.
11. Make the hole in a ceiling of appropriate diameter. Press the springs and mount the luminaire
in a ceiling niche (for luminaries with external module, the module should be put into ceiling
recess previously).
12. ATTENTION!
For luminaires with emergency unit it is prohibited to place extension box on the side where the
"TEST" button is located.
These instructions assume expert knowledge corresponding to a completed professional
education as an electrician.
Overall and installation dimensions, mm
1.
2.
CONNECTION SCHEMES
1. Mains connection scheme.
2. Mains connection scheme for luminaire with regulated control gear and backup power supply
unit: (on fig. A - external module).
6