RUS
Данный паспорт доступен для скачивания на сайте www.ltcompany.com в разделе «ПРОДУКЦИЯ»
ENG
You are welcome to download the passport in the PRODUCT section on our web-site www.ltcompany.com
KAZ
Бұл төлқұжаты сiз www.ltcompany.com сайтынан, «ӨНІМДЕР» бөлімінен жүктеп аласыз
UKR
Электронна версія паспорту доступна на сайті www.ltcompany.com в розділі «ПРОДУКЦІЯ»
6
Projector 250
– 400 W
Projector 35
– 150 W
Pic.1
Pic.2
Pic.3
Remove the lyre (1) from the unpacked projector by unscrewing two screws (2)
for its fixing on the body of the projector (pic. 1).
Fix the lyre (1) on the support surface (3), by at least two screws (pic. 2).
Install projector frame on the lyre in such a way that it does not impede opening
of the front cap (4) of the projector (pic. 3) and entering of supply cable (5) into cable
gland(6) (pic. 4).
Open the front cap (4) (frame with protective glass of the projector 250 or 400 W),
by unscrewing 4 screws (7) of its fixing on the body (pic. 3). In regard of the Projector
250
– 400 W – remove the rear cap (8) of electric box (9) (pic.1).
Insert stripped supply cable (S) into cable gland (5), and fix its ends into the terminal
block (10) keeping poles (pic.4).
Insert the lamp of corresponding power indicated in the projector marking
into the lampholder.
Fix the front cap (frame with glass) on the body of the projector and put the cap
of electric box of the projector 250-400W into its place.
Install the projector at the necessary level to vertical using mil scale and fix projector
body on the lyre.
е.
9-12 mm
Pic.4
