Pg. 2
www.lightingcontrols.com
INTRODUCTION
Introduction:
Almost all of the devices in the GR
2400 Lighting Control System are digital, meaning
they are part of a peer-to-peer network and can
be programmed . It is important to understand
from the outset that you effect almost any change
through programming alone .
This programming guide covers the basics—
programming switches, schedules and photocells .
Other manuals exist for more advanced
programming issues .
Additionally, help is only a call away . If equipped
with a modem, we can dial into your system and
program it for you, at no cost . Call us any time at:
(800) 345-4448 .
The DTC (Digital Time Clock):
Most
programming is done from the DTC Clock (shown
below)/Programmer located in the master
Lighting Control Panel (LCP) .
Virtual Clock or Unity Lighting Control software
allows remote connection via the internet or
modem to the DTC .
Use to
position the
cursor
Scroll
through
choices in
one field
Exit out
of a menu
Select an
item or
enter a
sub-menu
Deletes programming or
information about an item
(use with caution)
Increases/decreases
contrast of display screen
Cursor
