Technical Manual
6-4
Figure 6.6 Upper fairing mount for linkage
steering
When shifting, ease off of the throttle, so
that the shift is smooth. If you have the
assist in too high of a gear when starting up,
it will surge or stall.
FAIRING
The fairing mounts with T-Block clamps with
arms on the handlebars. The lower mounts
are P-clamps and twist tabs on the fork legs.
The fairing can be adjusted up in cold
weather so that the wind flow is directed
over your head. In hot weather, you may
want the air shed off the top of the fairing to
flow toward your face.
Place the lower mount clamp on the left
fork leg, just above the brake mount. Align
as shown in figure 6.4. Place the right clamp
on the rt fork leg even with the left. Insert foam
tape between mount and fairing.
Fairing Mount for Linkage steering
Linkage steering requires a customl “rhyno” steer
tube clamp mount that holds a 24” T-stem of 1-
1/4”x.058” AL tubing. Standard Zzipper 8” block
clamps attach to the .875 x .058 cross T-bar to
attach to the upper fairing mount holes.
Figure 6.4. Lower fairing mount, 20 and 26" fork
Figure 6.5. Upper fairing mount for tiller
steering
Figure 6.65 – Fairing on suspension fork
