LIGHT PROGRESS
DIRECT-H-K [eng]
gen-2021
Pag. 7/16
Locking Bracket
To install
UV-DIRECT ....K
series devices make a
hole with dimension as in the table on the false
ceiling (fig. 3B). Insert the device into the hole as
shown in Figure 3C. The ceiling may have a
thickness from 1 mm up to 40 mm.
Fig. 3C
Fully open the locking brackets. Insert the unit into the hole in the
ceiling, initially at one side, then pass the device on the other side.
Hole for
UV-DIRECT-E75H-K
Fig. 3B
Hole for
UV-DIRECT-E40H-K
Place the unit centered in the hole and close the two locking
brackets by tightening the two screws (green).
