Introduction
Thanks for choosing our laser device, believing this brand new product will bring you unlimited marvel and
happiness. Before operating this device, please read this manual thoroughly, and retain it for future reference.
CAUTION
Please read this manual fully before installing or operating this product as it contains important
safety information relating to its installation and operation.
This Class 3B
laser product emits hazardous levels of optical radiation and will cause injury to
the eyes if viewed directly.
This product is not suitable for projection directly at audiences or other personnel.
This product must not be used for any form of audience scanning application and is for
professional use only.
Important information
This product is a Class 3B laser and should only be installed and used by personal who are trained in the
management of laser radiation and are able to operate in accordance within the guidance given by the Health
and Safety Executive (HSE) in HS(G)95: “The Radiation Safety of Lasers used for Display purposes”.
This product contains no user-serviceable parts. Under no circumstances should any attempt be made by the
user to dismantle or modify it in any way.
Installation instructions
This product must be securely mounted with adequate fixings to hold the weight. If mounted at height, use a
safety wire attached to the eyebolt and a secondary fixing point. Position the aperture so that its emission is
always directed away from people and objects that are able to reflect the emission towards people. In this
regard the separation distances of 3 metres vertically and 2.5 metres horizontally, cited in HS(G)95 and shown
below must be observed.
Vertical bird’s eye view
