Light Emotion FLAT1212, Инструкция по эксплуатации

Страница: 3 / 10

3
•
In the event of serious operating problem, stop using the unit immediately. Never try to repair
the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center.
•
Never connect the device to dimmer pack.
•
Make sure power cord is never crimped or damaged.
•
Never disconnect power cord by pulling or tugging on the cord.
•
Never carry the fixture directly from the cord. Always use the hanging/mounting bracket.
•
Avoid direct eye exposure to the light source while it is on.
POWER:
CAUTION:
This lighting effect is designed to operate at 240V. Power Consumption: 105W
FUSE:
CAUTION
: Only use the correct fuse as specified on the
rear panel of the lighting effect. Disconnect the lighting
effect from the mains before attempting to replace the
fuse.
To replace the fuse please follow the following steps:
1. Remove the fuse holder cover with a screwdriver.
2. Remove existing fuse.
3. Fit new fuse.
4. Refit the fuse holder.
Fuse: M205 2A slow blow
INSTALLATION:
CAUTION: For safe mounting read the following instructions
carefully.
•
Use suitable hook clamps* for hanging the lighting effect.
•
Use a safety wire* with a breaking strain of more than
double the lighting effect.
•
Do not look directly into the light source.
•
Make sure the lighting effect has suitable ventilation as per
the instructions below.
•
This lighting effect is intended for indoor use only.
•
To avoid electrical shock keep away from rain and
moisture.
•
Keep unit out of reach from children.
NOTE:
Use washers* and spring washers* when attaching your hook clamp* to the yoke.
1. For installation of the hook clamps* and safety wire*.