Light Bright
Synjax Matrix Bar 12
6. Mounting the device
The spotlight can either be positioned or suspended from a truss system. Horizontal
mounting to the truss is also permitted.
If you place the unit on the floor, you may only operate the unit on a hard surface, as the air
inlets in the foot must remain free!
To hang the unit on a traverse system, please use only approved holding devices such as
superclamps or couplers.
Make sure that the truss construction on which you mount the device complies with the
safety regulations. When using a truss, always secure the spotlight with a safety device that
complies with the national regulations. Use the safety eyelet on the device for this purpose.
7. Control Panel
The spotlight has a display to show the set parameters and four buttons to adjust them. This
control panel allows you to adjust all the parameters of the spotlight according to your needs.
Operation of the menu
Each setting must be confirmed with ENTER!
The last setting confirmed with ENTER is active after a restart. In DMX mode it is absolutely
necessary to confirm the DMX address again after changing the MODE.
dXXX
Setting the DMX address from 1 - 512
rXXX
Red backlight static from 0 - 255 Dimmbar
GXXX
Green backlight static from 0 - 255 Dimmbar
bXXX
Blue backlight static from 0 - 255 Dimmbar
HXXX
White LEDs static dimmable from 0 - 255
8
