Light Bright
Synjax Matrix Bar 12
2. Safety instructions
CAUTION: Disconnect the device from the power supply before opening
the device. Touching live parts (high voltage) can cause an electric
shock.
Make sure that the mains voltage to be connected is not higher than the voltage indicated on
the type plate. This device should only be operated with the power source specified on the
type plate.
If you are not sure what type of power supply you have, contact your dealer or your power
company.
Always disconnect the device from the power supply before carrying out cleaning work,
changing fuses or replacing parts.
The power plug must always be accessible after installation of the spotlight. Do not overload
the sockets or extension cords as this may result in fire or electric shock. Do not place any
objects on the power cord. Do not install the spotlight in such a way that people can trip over
the power cord or step on it. Make sure that the power cord can never be crushed or
damaged by sharp edges. Check the unit and the power cord from time to time.
Always refer servicing to qualified service personnel.
ATTENTION: This light corresponds to protection class I. Therefore this
light must be connected to a mains socket with earthing contact.
Never connect this device to a dimmable power source.
Some smoke and odor may be produced during initial operation. This is a normal procedure
and does not necessarily mean that the unit is defective.
The unit becomes hot during operation. Never touch the device with bare hands during
operation!
When replacing fuses, only use fuses of the same type with identical values. Have fuses
replaced only by a qualified technician.
ATTENTION: EYE DAMAGE! Do not look into the light source for a long
time during operation. This can be harmful to the eyes. Possibly
dangerous radiation.
4
