10
Recording LED Status Information
Initialization
- When the camera is first turned on, the LED will flash red and green in
unison with the buzzer for about 3 to 5 seconds. This is normal. Once the LED’s
stop flashing and the buzzer ceases, the housing has booted and connected to
the camera. Your’re now ready to dive!
Standby/Ready Mode
- When the camera is fully charged and ready for use, the LED
will be a steady, solid green.
Recording Mode
- Once the camera is recording video, the LED will turn to a solid red.
Moisture Alarm
- In the event of moisture being detected, the LED will flash red and
green with an accompanying buzzer until the housing is turned off. If the
moisture were to disappear after the alarm has been triggered, the buzzer
will cease and the LED will continue to flash. As soon as moisture is detected
again, the buzzer will sound off.
(Fig. 14)
Flip Filter Lever
Monitor back
(Fig. 14)
On/Off/Mode -
TPress and release to turns the camcorder on, and cycles through
video mode, photo mode& playback mode.
-Press & Hold this button down to turn the monitor back off
Battery Status LED -
•
LED Off -
Battery strength good.
•
LED Red -
Battery time remaining is approx. 45 min..
•
LED Flashing Orange -
Battery time remaining is approx. 15 min.
(Fig. 13)
ON/OFF/MODE
Button
Front Plate
(Fig. 13)
Flip Filter -
Rotate lever to engage or disengage color correction filter.