3
Charging Cont‘d
Charging with the Mini-L charger
1. Plug the charger body into a wall socket
2. Attach the battery to the Mini-L charger by aligning the colored arrow on the plug
from the charger with the orientation indicator on the battery (red dot, or groove),
inserting the plug into the battery’s socket.
3. A red LED will illuminate, indicating the battery is receiving a charge.
4. When the indicator LED turns green your battery is fully charged.
A quick flash (0.1 seconds every second) indicates the battery has very low voltage, and the
charger is attempting to recondition the battery for charging.
A slow blink (0.5 seconds every 4 seconds) indicates a defective battery, and you should
contact the Light & Motion service department. If no indicator light comes on, make sure
the connector is fully seated. We have the most water-resistant connector in the industry,
which requires a firm insertion to burp the trapped air and complete the sealed connection.
If the LED on the charger still does not illuminate, the charger does not recognize the
attached battery as valid for charging (older NiMH batteries).
The Mini-L Charger will charge a fully depleted 2 or 3 cell battery in about 6 hours.
