2
Seca 800:
1b. Seca 800 LED light head
(red cooling fins)
2b. 11.1V, 3 Cell Li-ion battery
3b. Light & Motion Mini L Charger
4. Helmet Mount
5. Velcro Battery Strap
Always fully charge your battery before its first use. Batteries are shipped only partially char-
ged and must be fully charged to achieve the proper run time. Take this time to familiarize
yourself with our smart charger and what the status indictor LEDs mean.
Note: All of our Li-ion chargers are ONLY compatible with Light & Motion batteries.
The battery may be left on the Mini L 1.5 or Mini-L charger indefinitely, without harming the
battery.
Note: We only use smart chargers. That means you can leave the battery on the char-
ger after it is done charing, with no harm to the battery. To maintain optimum batte-
ry performance, please take the battery off the charger after it is done charging. For
long term storage, we recommend storing your Lithium-ion battery with a 40-60%
charge. Every three months, run the battery down using the light head and then
charge it back up to 40-60% charge. Then fully charge the battery before you ride.
An acceptable alternate method of extended storage is giving the battery a top-up
charge once a month.
Charge your battery immediately after a ride, remove it from the charger for storage, and
then top it up the day of your next ride.
Charging with the Mini L 1.5 Charger
1. Plug the power cord into the charger and then into the appropriate wall socket.
2. Attach the battery to the Mini L 1.5 Charger by aligning the colored arrow on the
plug from the charger with the red dot or arrow on the Li-ion batteries, inserting the
plug into the battery’s socket.
3. Once the battery is attached to the Mini L 1.5 Charger, an orange LED will
illuminate on the right side and a green LED will illuminate on the left side of the
charger indicating the battery is receiving a charge.
4. When both LEDs illuminate green, this is an indication the battery is fully charged.
An alternating orange/green LED indicates an error. If this happens, remove the battery and
unplug the Mini L 1.5 Charger from the wall and wait about 5 minutes. Then try to charge
the system again. If you see the same error, please contact the Light & Motion service
department. If no indicator light comes on, make sure the connector is fully seated. We
have the most water-resistant connector in the industry, and sometimes you need to “burp”
the air trapped under the connector.
The Mini L 1.5 Charger will charge a fully depleted battery in about the following times:
3 cell
1:45hrs
6 cell
2:00hrs
Charging
