USER MANUAL
–
HDN
–
GB VERSION 1.4
Liftup A/S
Hagensvej 21| DK-9530 Støvring | Denmark |
T:
+45 96 86 30 20 |
M:
[email protected] | www.liftup.dk | CVR DK-1015 3964
17
14.
Maintenance
14.1
Cleaning
General cleaning may only be done using a well-wrung cloth.
Do NOT use a high-pressure jet or rinse the HDN-Lift directly using a hose.
14.2
Mechanical maintenance
The mechanical maintenance of the lifting platform shall normally only be undertaken in
connection with the regular service inspection. This is to be undertaken by an authorised
service technician 2/4 times a year, depending on whether the platform is indoors or
outdoors.
Should unexpected errors or jarring sounds occur, contact your dealer at once.
14.3
Remote control (accessory)
Two batteries are installed in the remote control. In order to ensure reliable function
swap the batteries every 6 months. To swap the batteries, do the following:
1.
Loosen the screw on the rear of the remote control
2.
Remove the back panel
3.
Loosen the screw which holds the batteries
4.
Swap the batteries
5.
Refit the battery holder
6.
Refit the back panel and test
The remote control uses 2 x AAA batteries.
