USER MANUAL
–
HDN
–
GB VERSION 1.4
Liftup A/S
Hagensvej 21| DK-9530 Støvring | Denmark |
T:
+45 96 86 30 20 |
M:
[email protected] | www.liftup.dk | CVR DK-1015 3964
10
7.
Safety instructions
7.1
Installation and maintenance
Do not attempt to install or maintain your HDN-Lift yourself.
This MUST be undertaken by an authorised* service technician.
Do NOT remove the protection or safety plates, as this may lead to personal injury.
7.2
Unintended HDN-Lift movements
If during the use of your HDN-Lift movement or action occurs which is not described in this
manual, stop the lifting platform and summon technical assistance.
If your HDN-Lift fails to move plane as a platform, a mechanical defect may have occurred
–
summon technical assistance.
If the lifting platform does not stop respectively on the upper and lower levels level with the
floor, it may need calibration. Do this by moving the platform down to floor level and holding
down the down button for approx. 5 seconds.
If the problem continues, call technical assistance.
7.3
HDN-Lift movements
The space under the lifting platform must be kept free of all objects that may impair the
platform’s
downward movement. Otherwise the platform cannot be moved to the lowest level
and thus not be used as a wheelchair lifting platform. Under normal circumstances no objects
will be able to get under the platform, as access is completely barred.
7.4
Avoid personal injury
So as to avoid personal injury it is NOT permitted to use the HDN-Lift when someone or
something is at risk of being injured by crushing, cutting, falling, slipping or similar.
The operator shall as far as possible ensure that movement can occur without putting
someone or something at risk.
Be extra careful when there are small children and disabled on or near the lifting platform, as
these groups cannot always be expected to be able to foresee the possible consequences of
the movement.
7.5
Overload of the HDN-Lift
In order to avoid material damage from overload (max. 400 kg evenly distributed) your HDN-
Lift is fitted with overload protection, which stops the platform in case of overload.
In such cases, move the platform down in order to exit it.
*Have gone through a product and service course at Liftup.
