liftup HDN-Lift, Руководство пользователя

Страница: 15 / 24

USER MANUAL – HDN – GB VERSION 1.4
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: mail@liftup.dk | www.liftup.dk | CVR DK-1015 3964
15
HDN-Lift ready for drive on from the bottom level
12.3 Operating the HDN-Lift from the BOTTOM level
If the lifting platform is not already at the bottom level, call it as follows:
In order to call the HDN-Lift to the BOTTOM level, depress the
button sited
below the platform.
The platform begins to move towards the bottom level. When this level has been reached, the
safety plates continue to drive down. When the safety plates are completely down and plane
with the floor, the platform automatically stops, and is now ready to enter.
Remember to depress the push button for the entire time, since the platform will
automatically stop when the button is released.
12.4
Operating the HDN-Lift when the user is on it
Use of the lifting platform is performed by using the button sited by the platform, or
by using the remote control*.
- To raise the lifting platform, press the top button and hold it down until the platform
stops.
- To lower the platform, press the bottom button and hold it down until the platform
stops, and the safety plates are completely down.
* Additional equipment