14
15
Fitting the Forehead
1)
Please make sure the LIFTiD Neurostimulation device is
centered and straight across your forehead. There
should be at least a 2-finger distance between the
eyebrows and the bottom of the electrodes (refer to the
photo) The plus (+) sign should be over your left eye and
the minus (-) sign over your right eye (refer to the photo).
In the middle of the plus (+) and minus (-) signs is the
on/off button.
2)
Tighten the soft headband strap so it is firm and com-
fortable. The headband does not need to be super tight
with the LIFTiD device pressing hard on the forehead, just firm and comfortable.
Make sure that the electrodes are as high up on the forehead as possible, all
the way up to the hairline. The electrodes should not cover the hair in any way,
rather they can touch the very edge of the hairline. There is a convenient mirror
included in the set, so you can see yourself, to ensure proper set up.
3)
The on/off button and LED light are facing down, toward the face, and exactly
like the photo (not facing up).
4)
Everyone has a different shaped head, a different hairline, and different skin,
which makes the challenge of designing a device to fit all heads very unique.
LIFTiD’s proprietary design with flexible electrodes can fit most heads easily and
comfortably. Please use the photos as reference and setup LIFTiD in a similar
location. If you have any open wounds, cuts, or open acne sores (pimples),
please do NOT use the LIFTiD device until fully healed.
more photos on next page