12
13
Preparation
1)
Prepare a “salt water solution” in the 2-ounce bottle provided. Fill the
pre-measured spoon provided with “table salt” and pour into the bottle
provided. Fill the bottle with warm water to the top. Place the cap on tight and
shake the bottle until the salt is diluted. This recipe of a half teaspoon of salt and
warm water combined in a 2-ounce bottle is recommended for saturating the
sponges provided and making your stimulation session comfortable.
2)
Take out 2 dry sponges or damp sponges from a prior session. Since the white
sponges are shipped flat, wet them thoroughly the first time and they will expand
to their normal size. The sponges need to be damp and saturated in salt water for
optimal performance and connection.
3)
Wet the 2 sponges on both sides in warm water thoroughly before using.
Rinse the sponges out so they are damp and not dripping wet.
4)
Squirt the salt water solution from the 2-ounce bottle provided on each sponge
so they are entirely soaked. You do not need a lot of salt water to do this. Rinse
out the salt water thoroughly so the sponges are sufficiently damp, mildly wet,
but not dripping wet.
5)
Place one sponge in each electrode so the sponges are flat and smooth.