24
25
Charging the Battery
Inside the LIFTiD Neurostimulation kit, there is a black USB cable for charging the
LIFTiD device. LIFTiD runs on an internal lithium ion battery, which can last up to
30 stimulation sessions on a single charge. On the back side of the device, the
micro-USB charging port is located between the two electrodes. There is a black
plastic cover on the port. Gently remove the cover and let it hang to the side during
charging. After charging, push cover back in place. Plug the USB side of the cable
into any USB port. Plug the smaller micro-USB side gently into the LIFTiD port. Do
not force the plug into the LIFTiD port. A “RED” LED light (next to the on/off button)
will shine while the device is charging and a “GREEN” LED light will shine when the
device is fully charged. Always replace the micro-USB port cover after charging.
— If the battery capacity is less than 20%, then a “RED” LED light will flash and make a
beeping sound after each stimulation session. This is a reminder to charge LIFTiD.
— It can take up to 4 hours to fully charge LIFTiD. Do not overcharge.
— LIFTiD will not operate when charging. Do not try to charge LIFTiD and start a
stimulation session at the same time.
Charging Port