13
4-3.1. LIFT CYLINDER
1. Raise the platform
2. Swivel both maintenance safety bars down against the base.
3. Lower the platform until the safety bars contact the end of the base and the platform
does not lower any further.
4. Loosen the bolt securing the bottom of each lift cylinder to the base.
5. Partially collapse the cylinder rod and lift the bottom of the cylinder out of the
channel in the base.
6. Apply a light coat of moly-grease to the channel. See Table 4-2, No.3.
7. Position the cylinder(s) in the channel and secure with the mounting bolt(s).
8. Raise the platform and position the maintenance safety bars in their proper
disengaged position.
FIG. 4.1
Index
No.
Location Method of
Application
Type Table
4-2
Application of Lubricant
1
Hydraulic
System
N/A
No.2
Add Hydraulic oil to reservoir through
breather port. Note: Unit is supplied with
oil. Do not over fill.
2
Upper
Rollers
Gun
No.1
Pressure lubricate (two fittings)
3
Lower
Rollers
Gun
No.1
Pressure lubricate (two fittings)
4
Pivot
Points
Gun
No.1
Pressure lubricate (two fittings)
5
Lift
Cylinder Brush
No.3
Refer to paragraph 4-3.1
