Page 19
Caution
A Bluetooth disconnection between the
cellular phone and the sensor might occur
due to electromagnetic interference. In this
case the sensor will search for the cellular
phone device every 3 minutes.
If the cellular phone Bluetooth communication
is not active for 60 minutes, the ACT III
(monitor) application will automatically restart
the Bluetooth communication.
Always change the sensor battery when
connected (Bluetooth) to the cellular phone.
A low sensor battery message indicates there
are at least six hours before the battery fails.
First time use
– The patient must call
LifeWatch to receive instructions on how to
proceed for the first time use. The first time
the ACT monitoring system is activated and is
attached, certain screens are displayed that
are not seen during normal operation. These
screens are used for calibration. Please refer
to “First Time Activation” section of the
manual for more details.
Caution
Please refer to the user manual of the
manufacturer of the cellular phone for Health
and Safety Information pertaining to the use
and operation of the cellular phone. The
cellular phone manual can be downloaded
from the Internet.
Do not use the cellular phone for any reason
outside of the designated monitoring function.
Keep the ACT III kit contents away from
children.
