12
13
Install Next two Wall Panels (JF) at the back left corner of
the shed. Then connect with a Corner Channel (AI).
See
Assembly Tip #2 (p. 9)
.
7
Assemble Next Corner
7a
FE
(18)
Assemble next three Wall Panels (JF). Secure the
panels together with 1/4” Screws (FE) as shown.
See
Assembly Tip #4 (p. 10)
.
8
Assemble Left Wall
8a
FE
(18)
Step 7 Hardware
Step 8 Hardware
Hardware Bag: 1009126
Screwdriver
Hardware Bag: 1009126
Screwdriver
10
Install Trim to Corners
Snap six Black Trim Brackets (HA) to a corner of the shed.
Fasten each Bracket with two #10 x 1/2” Screws (CN). There are
no pilot holes in the shed wall, the screws are inserted directly
into the plastic.
10a
HA
Install Next two Wall Panels (JF) at the front left corner of
the shed. Then connect with a Corner Channel (AI).
See
Assembly Tip #2 (p. 9)
.
9
Assemble Last Corner
9a
FE
(18)
Step 9 Hardware
Hardware Bag: 1009126
Screwdriver
CN
CN
The tab on the Trim Brackets fi t into
the six screw indentations along
each corner of the shed.
Second person should
apply pressure on
opposite side of the wall
for easy insertion of
screws.
Slide a Corner Trim Piece (AL) onto the Brackets. Align the
Trim peice with the top of the Wall Panel and Fasten with a
#8 Pan-Head Screw (CX). Insert the Screw on the side of the
shed so that it will be hidden by the roof overhang.
10b
Use extreme caution when standing on ladders to
perform assembly steps. Follow all warnings and
cautions on the ladder. Failure to follow all of these
instructions and warnings could lead to serious
personal injury or property damage.
WARNING
Repeat steps 10a and 10b for all four corners.
AL
AL
CX
Be Sure that the
Corner Trip Piece is
even with the front
edge of the Wall
Panel, before securing
with a screw (CX).
CN
(48)
Step 10 Hardware
Hardware Bag: 1009129, 1011134
Screwdriver
CX
(4)
