39
X
SECTION 6 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
To prevent serious injuries, two adults are required to complete assembly.
WARNING
The Poles must be seated together! Even if the Poles cover
the slots before seating, they must be struck on a hard
surface fi ve to six times! Failure to seat the Poles correctly
could allow the Poles to separate during use, which could
lead to serious personal injuries or property damage.
ATTENTION: THIS STEP CANNOT BE REVERSED!
6.4
(3)
Wood Block
• While two people continue to hold the assembly in place, set a block of Scrap Wood on top of the Rigid Arms and strike it
5-6 times with a hammer or mallet.
You must have wood on top of the Arms before hitting them with a hammer to prevent scratching the
powder coating.
The bottom edge of the Middle Pole must reach within 1/2 inch of the 5-inch mark on the Bottom Pole.
• The Poles must be seated together! Even if the Poles cover the
slots before seating, they must be struck on a hard surface
fi ve to six times! Failure to seat the Poles correctly could allow
the Poles to separate during use, which could lead to serious
personal injuries or property damage.
• If your Pole sections do not reach within 1/2” of the 5”
mark after seating, DO NOT COMPLETE ASSEMBLY. Call
our Customer Service number for assistance.
!
!
