Lifetime 71526, Инструкция по сборке и руководство пользователя

Страница: 4 / 10

4
NOTE: The Backboard Brackets shown are Lifetime Products
®
models
and are for illustration purposes only. If using Brackets other than the
Lifetime Products
®
models shown here, refer to the instructions provided
with the Brackets.
UB
RC
RK
RH
AD
1A
Required for
this page:
RC
RH
RK
(4)
(2)
(1)
(Not
actual
size)
OPTION 1
THIS OPTION IS FOR USE WITH BACKBOARD BRACKETS
WITH
A U-BOLT.
ASSEMBLE THE U-BOLT (PROVIDED WITH THE BACKBOARD BRACKETS) TO THE BACKBOARD BRACKETS
ACCORDING TO THE INSTRUCTIONS PROVIDED IN THE POLE OR MOUNTING BRACKET UNIT.
If you have Backboard Brackets (pictured at right) and
they come with a U-Bolt, use Option 1 and the U-Bolt
provided with the Brackets. If the Backboard Brackets
do not include a U-Bolt, use Option 2 instead.
U-Bolt
Backboard
Brackets
1A.1 Lay the Backboard (AB) on a table or bench.
1A.2 The U-Bolt (UB) goes through the top holes in the bottom
of the Backboard.
Note: Only hand tighten
the Nuts (RH) now.
1B
RE
RE
RE
1B.1 Slide the Carriage Bolt (RE) into the
crimped slot in each Backboard channel.
RH
RH
1C.1 Bend the Backboard Brackets out so the
lower holes go over the Carriage Bolts.
Caution: Do not
overtighten these
Nuts.
1C.2 Completely tighten the
Nuts (RH) from Step 1A.
To finish the assembly, turn to Page 6
1C
RE
1/2” Wrench
HD9136B
(2)
AB