1.
Before proceeding, ensure that the treadmill power is off and that it is unplugged from
the electrical outlet.
2. To remove dust, use a small vacuum nozzle to carefully vacuum around all visible
components.
3. To remove film or dirt use a slightly damp rag with a mild cleaning agent sprayed onto
the rag only.
4. Be careful not to immerse any treadmill component with any liquids.
Aligning the Running Belt
Ensure the running belt is centered on your treadmill at all times. Running style and a
non-level surface are two instances that may cause the belt to drift off center. Minor
adjustments to the two bolts at the rear of the treadmill are necessary when the belt has
drifted off center.
1.
Press "START" to begin running belt, then increase the treadmills speed to 3 MPH.
2. Stand at the rear of the treadmill to determine which direction the belt is drifting.
3. If the belt drifts to the left, turn the left adjustment bolt one-quarter of a turn clockwise
and the right adjustment bolt one-quarter turn counter-clockwise. (See FIG.C)
4. If the belt drifts to the right, turn the left adjustment bolt one-quarter of a turn
counter-clockwise and the right adjustment bolt one-quarter turn clockwise. (See FIG.D)
5. Observe the tracking of the belt for about two minutes. Repeat step 3, 4 and 5 as needed.
18
FIG.C
FIG.D
