28
Assembling Your R5i Recumbent Bike
Step 9: Console Upright Assembly
A.
Slide the
Upright Cover (11)
a third
of the way up the
Console Upright
Assembly (10)
as shown below.
B.
Align the
Console Upright Assembly
(10)
with the
Console Upright Bracket
(P)
on the
Main Frame Assembly (1)
.
Plug the two
Connectors (N)
from the
Console Upright Assembly (10)
into
the two
Connectors (O)
coming from
the
Main Frame Assembly (1)
.
C.
Tuck excess wiring into the bottom
tube of the
Console Upright Assembly
(10)
.
D. Install three
M8x50L Countersink Bolts
(27)
through the
Console Upright
Assembly (10)
and into the
Console
Upright Bracket (P)
Do not tighten
until all three bolts are installed.
E.
Slide the
Upright Cover (11)
down the
Console Upright Assembly (10)
to cov-
er the mounting bolts and bracket.
Press down firmly to snap into place.
NOTE: Remove wire ties from
connectors (N) and (O).
NOTE: Be Careful not to pinch the
wiring when securing the upright
assembly (10) to the console upright
bracket (P).
10
11
O
N
10
P
1
27
