7
DYMO
STEP 1:
STEP 2:
STEP 3:
1. Open the carton
2. Extract the parts listed above
3. Place the Main Frame (#1) onto level
ground
1. Using the Allen Key Wrench (#12),
attach the screw M8*45 (#70) and Lock
Washer (#64) to the base frame
through the base and right upright tube
2. Repeat for the left upright tube
Note: Support the upright with your hand to
prevent it falling down and causing injury.
1. Whilst holding the display frame, use the
Allen Key Wrench to lock the base
2. Secure upright tube by tightening screw
M8*16 (#51) and Lock Washer (#64
）
3. Left side assembly method same as
right side
PLEASE NOTE: BE CAREFUL NOT TO CUT
OUTSTANDING WIRES UNDERNEATH
HANDLES BELOW THE DISPLAY
