INSTRUCTION
3.1 Initial Use
3.2 Keyboard Operation
3.3 Unlock/Lock Operation
1 . Make sure that the door lock is installed properly and batteries are
already placed in compartment. (AA Battery * 8)
2 . Add two admin accounts to activate at least one unlocking method
(from fingerprint, password and NCF card).
3 . Now the door lock is good to use. You can now authorize more
fingerprints, passwords or NFC card to grant access.
1 . How to Unlock in Semi-Locked State
1 . Slide to activate keyboard, input your password and press
# to finish.
2 . Only
2, 8, * and # are lit under Admin Mode. Press 2 to scroll up, 8 to
scroll down, * to go back, # to confirm.
9 .
nstall batteries. Close battery
compartment.
10 .
Please check the handle from
both sides of the door, stop
button, emergency key and other
components after installation to
confirm the door lock working
properly.
Back
Scroll Up
Scroll Down
Confirm
Semi-Locked State : Only latch bolt is
locked; the lock goes semi-locked
automatically after released in 5
seconds.
13
14
