LifeSize Multipoint-12, Руководство по установке

Страница: 24 / 49

16 LifeSize Multipoint Installation Guide
LifeSize Multipoint Unit Initial Configuration
Baud rate: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
5
Turn on the power to the LifeSize Multipoint unit.
A log of the auto-boot events appears on the computer.
6
When the message “Press any key to start configuration”
appears on the screen, press any key within 6 seconds.
The network configuration
Main menu appears as follows:
Press any key to start configuration...
Main menu
N: Configure default network port values
P: Change the configuration software password
S: Configure network security level
A: Advanced configuration menu
Q: Quit
Select:
Caution
If you do not press a key before the countdown ends, the device
continues its initialization and you can only configure the device by pressing
the
RST button on the front panel.
7
At the prompt, enter N to configure default network port values
and press Enter .
8
At the Enter IP address for Interface No. 1 prompt, enter the
IP address you want to assign to the LifeSize Multipoint unit
and press Enter .
Caution
Do not use leading zeros in the IP address.