Re Fitness Collection
9
8
Waver Enhance User Manual Lifepro
ACTIVATE THE REMOTE CONTROL
A small plastic insulation sheet separates the
battery from the battery terminals during
shipping.
• Pull on the plastic sheet sticking out of the
remote control to remove it.
ATTACH THE TWO RESISTANCE BANDS
The resistance bands let you incorporate
strength training into your workout.
• Turn the unit upside down. Swivel the
two metal bars so that they are hanging
over the front edge of the unit.
• Turn the unit right-side-up. Loop the end
of a resistance band through one of the
metal bars.
• Thread the handle of the resistance band
through the loop and pull tight.
• Attach the second resistance band to the
second metal bar in the same manner.
CONNECT TO POWER
• Insert the power cord firmly into the power cord
jack at the front of the unit.
NOTE:
Press forcefully until you feel a click
indicating the cord is securely connected.
Power cord fits tightly so it will not loosen
during use.
• Plug the power cord into an AC outlet.
POWER ON THE WAVER ENHANCE
• Flip the Power switch to the ON position.
Setup your Waver Enhance in just four easy steps:
3
4
2
1
4 Mini Bands
Power Cord
Lifepro Waver Enhance
Vibration Plate
Remote
Control
2 Resistance
Bands
Your Waver Enhance is now ready to use. See OPERATING INSTRUCTIONS and
CREATING A WORKOUT on the next pages for details on how to use the Waver
Enhance.
