10
InfinityBox P
lus User Manual Lifepro
Strength Training Collection
11
UNFOLD THE
TRAINING BASE
1. Unfold the training base
(A)
and place it
face down on a flat, clear floor.
STABILIZE THE
TRAINING BASE
There are two options for stabilizing the training base:
1. Place the exercise mat
(L)
under the training base.
OR
2. Insert the twelve rubber feet
(K)
into the pegs on the bottom side of
the training base
(A)
, as shown below.
NOTE:
This is the best option when you would like to use the exercise
mat in other ways during your workout (for example, to place under
your knees or hips.
NOTE:
You will need to remove the rubber pads any time you need to
fold the training base for storage or travel.
NOTE:
Using the rubber feet and exercise mat at the same time is not
recommended as it will make the training base unstable.
ASSEMBLE THE
COLLAPSIBLE BARBELL
1. Screw the two threaded ends of the collapsible barbell
(B)
together.
The two metal loops will be on the outer ends of the assembled barbell.
NOTE:
Clip resistance bands
(D)
to the metal loops on the ends of the
barbell with two carabiners
(I)
.
ASSEMBLE THE
AB WHEEL
1. Insert the female end of the collapsible barbell
(B)
through the center
of the ab wheel
(C)
.
2. Screw the male end of the barbell into the female end extending
through the ab wheel.
1
2
1
2
Female End
Male End
