LIFEPLUS HSM-W03C, Инструкция по эксплуатации продукта

Страница: 9 / 10

- 14 - - 15 -
MAINTENANCE
service@lifepluspro.com service@lifepluspro.com
TROUBLESHOOTING
Adjusting
1. Place the treadmill on a flat surface.
2. To adjust the alignment of the belt, STOP the treadmill.
3. Use the Allen wrench provided and turn the end cap screw turn counterclockwise –
see illustration C.
4. Adjust the left and right sides at the same time to keep the running belt centered.
5. Use the Allen wrench provided and turn the end cap screw turn clockwise – see
illustration D.
6. Start the treadmill at a moderate pace and check.
We strongly recommend you to check the alignment of the running
belt when you take it out of the box to ensure it hasn’t moved during
transit and before or after each workout to avoid injury.
Problem
Potential Causes Corrections
Treadmill
will not start.
Belt is not
centred.
Belt slips.
Belt
hesitates
when
stepped on.
Treadmill not plugged in.
Plug the power cord into a
wall outlet.
Safety Tether Key is not
correctly installed.
Reinstall the Safety Tether
Key.
Reset the circuit breaker,
or call an electrician to
replace the circuit breaker.
Wait 5 minutes and then
try to restart the treadmill.
Circuit breaker in the
house has been tripped.
Treadmill circuit breaker
has been tripped.
Belt not tight enough. Adjust belt tension.
Not enough lubrication
applied onto the running
deck.
Running belt tension not
even across the rear roller.
Apply lubricant.
Adjust belt tension.
Belt is too tight.
Center the belt.