Lubricating under the running belt will ensure superior performance and extend its life
expectancy. After the first 25 hours of use (or 2-3 months) apply some lubricant, and
repeat for every following 50 hours of use (or 5-8 months).
How to check running belt for proper lubrication
Lift one side of the running belt and feel the top surface of the running deck.
If the surface is slick to the touch, then no further lubrication is required.
If the surface is dry to the touch, apply some lubricant.
How to apply lubricant
Lift one side of running belt.
Pour some lubricant under the centre of the running belt on the top surface of the running
deck.
Run on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
NOTE: DO NOT over lubricate running deck. Any excess lubricant that comes out should
be wiped off.
10. In the working state, press the slow stop button (S), the motor will stop for 1 minute,
the time will count down for 1 minute, press the START/STOP button during the period,
it will stop according to the normal deceleration, and will stop after the stop. Mode, the
display content is not cleared.
11. In the working state, press the START/STOP button, the motor will decelerate
normally to stop the standby mode, and the display content will not be cleared.
LUBRICATION
PRESET PROGRAM DIAGRAM
- 12 -
- 13 -
Lubricant
1 PC
P1
P2
P3
P4
P5
P6
1.0 2.0 3.0 4.0 5.0 4.0 3.0 2.0 1.0 2.0 3.0 4.0 5.0 4.0 3.0 2.0 1.0 2.0 3.0 2.0
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20
2.0 2.0 3.0 3.0 4.0 4.0 5.0
5.0
5.0 6.0 6.0 5.0 5.0 4.0 4.0 3.0 3.0 2.0 2.0 3.0 3.0
1.0 2.0 3.0 2.0 3.0 4.0 3.0 4.0 5.0 4.0 5.0
5.0
5.0
6.0 5.0 4.0 5.0 4.0 3.0 4.0
2.0
3.0
2.0 3.0 3.0 4.0 3.0 4.0 4.0 5.0 4.0 5.0
6.0
3.0 2.0
5.0 6.0 6.0 5.0 4.0 3.0 2.0 1.0
2.0
1.0
2.0 3.0 4.0 5.0 6.0 6.0 5.0 4.0 3.0
3.0 4.0 4.0 5.0 6.0 5.0 4.0 3.0
2.0 3.0 3.0 3.0 4.0
6.0 6.0 6.0
4.0 3.0 2.0 2.0 2.0 3.0 4.0 3.0 2.0
TIME
（
MIN
）
TIME
STEP
(BASIC
TIME:
30MINS)
