8
ASSEMBLY INSTRUCTIONS
1. Front and Rear Stabilizers Installation
Position the Front Stabilizer (7) in front of Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (7) onto the front curve of the Main Frame (1) with two M8x70
Bolts (9), two Ø20xØ8 Big Curve Washers (11), and two M8 Cap Nuts (12). Tighten cap
nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Position the Rear Stabilizer (8) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (8) onto the rear curve of the Main Frame (1) with two M8x70
Bolts (9), two Ø20xØ8 Big Curve Washers (11), and two M8 Cap Nuts (12). Tighten cap
nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
9
9
11
11
12
12
8
63
87
1
11
12
(9) Bolt M8x70
4 PCS
(12) Cap Nut M8
4 PCS
(11) Big Curve Washer Ø20xØ8
4 PCS
