15
OPERATING THE COMPUTER
SPECIFICATIONS:
TIME --------------------------------------------------- 0:00-99:59 MIN: SEC
SPEED ------------------------------------------------ 0.0-999.9 KM/H
DIST (DISTANCE) --------------------------------- 0.0-999.9 KM
CAL (CALORIES) ---------------------------------- 0.0-999.9 KCAL
ODO (ODOMETER) ------------------------------- 0.0-9999 KM
(PULSE) ------------------------------------------ 40-240 BEATS/MIN
BUTTON FUNCTIONS:
MODE:
Press the MODE button to select each function of computer.
Press and hold the MODE button for 3 seconds, all data values will clear to zero except the
ODO (ODOMETER) data values.
SET:
Press the SET button to set data values of TIME, DISTANCE, CALORIES, or Pulse for
target pre-setting.
RESET:
Press the RESET button to clear data values of TIME, DISTANCE, or CALORIES to
zero.
Press the RESET button to clear data values of TIME, DISTANCE, CALORIES, or Pulse to
zero for target pre-setting.
Press and hold the RESET button for 3 seconds, all data values will clear to zero except the
ODO (ODOMETER) data values.
COMPUTER FUNTIONS:
AUTO ON/OFF:
When you start to exercise or press any key on the computer, the computer
will turn on. If you leave the equipment for 256 seconds, the power will turn off
automatically.
SCAN:
Press the MODE button until the screen displays SCAN; the computer will
automatically scan the function of TIME, SPEED, DIST (DISTANCE), CAL (CALORIES),
ODO (ODOMETER), and
(PULSE) every 6 seconds.
TIME:
Displays your elapsed workout time in minutes and seconds. When you start to
exercise, time starts counting up from 0:00 to 99:59 minutes per 1 second increment. You
may also pre-set target time in STOP mode before training. To set TIME press the MODE
button until you see the TIME on the screen. Press the SET button, TIME begin blinking.
Press the SET button to change the time, each time you press the SET button TIME should
change by 1 minute. Press the RESET button to clear the target time to zero. The pre-set
target time range is from 00:00 to 99:00 minutes. Once you pre-set target time and then
start to exercise, time starts counting down from pre-set target time to 0:00 per 1 second
backward. When the pre-set target time counts down to 0:00, time will start to count up
immediately and the computer will begin beeping to remind you.
