Electrical Power Requirements
Cross-Trainers with the Discover SE3 console require an AC power supply according to the electrical configurations listed
in the charts below.
Warning: Use only the supplied power brick and line cord. Do not use any modification to connect to a 2-prong
outlet. Product must be connected to a properly rated 3-prong outlet.
Output Current
Output Voltage
Frequency
Supply Voltage
Console
5 A
24 VDC
47 - 63 Hz
95 - 264 VAC
Discover SE3 / SE3 HD
Consumer / Home Units Outlet &
Breaker (Amps)
Commercial Units Outlet &
Breaker (Amps)
Outlet Voltage
15 (no more than 4 cross-trainers
per breaker)
20 (no more than 5 cross-trainers
per breaker)
120 VAC
12 (no more than 4 cross-trainers
per breaker)
12 (no more than 5 cross-trainers
per breaker)
230 VAC
Note: Do not modify the plug provided with this product. If the plug does not fit into an available electrical outlet,
have a proper outlet installed by a qualified electrician.
Note: Make sure the power brick cord is securely connected to the base unit. A loose connection may result in
the unit not receiving external power.
Cable TV Hook-Up
The console can receive both analog and digital signals. Life Fitness is not responsible for the installation of CATV service
or components required for the delivery of CATV service. An external TV signal input via a 75-ohm coaxial cable must
be present before TV setup can occur.
Note to the CATV Installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building as close to the point of cable entry as practical.
Page 11 of 22