Attach Moving Handles
Run Heart Rate Cable and Keypad Cable down through the opening and make connections.
Qty.
Description
1
Handlebar, Left
1
1
Handlebar, Right
2
8
M8 X 20 Flange Head Cap Screw
3
27 Nm (19.91 ft. lbs.)
Attach Console Support Weldment
Caution: Remove any protective covering / tape from the monocolumn and console support weldment prior to
attaching to base! Failure to remove the protective covering can cause improper grounding!
Qty
Description
1
Console Support Weldment
1
4
M8 X 20 Flange Head Cap Screw
2
27 Nm (19.91 ft. lbs.)
Attach Upper Right and Left Shrouds
Note: Check for proper clip engagement after
installing the upper shrouds.
Qty.
Description
1
Shroud: Upper, Right
1
1
Shroud: Upper, Left
2
4
M4.2 X 10 Phillips Pan Head
Screw
3
4
Grommet
4
1.5 Nm (13.3 in. lbs.)
Page 17 of 22