LifeCore Fitness LC-CD500, Руководство пользователя

Страница: 24 / 33

24 | P a g e
Adjustment Instructions
How to Use the Manual Stride Length Adjuster -
The LC-CD500 is equipped
with a manual stride length adjustment system. The Purpose of this function is to allow a user
to change his/her stride length between 17" and 25". Changing the stride length will
increase/decrease the distance it takes to do one revolution during exercise. Adjust the stride
lengths according to what feels best for the user based on his/her height and exercise routine.
Step 1:
Loosen knobs A & B by turning them counter-clockwise, making sure not to fully detach knob
A or B from the unit as it will detach from the unit.
Step 2:
While holding onto knob B , simultaneously pull outwards on knob A to disengage the locking
pin and hold it outwards. Using the same hand that is holding Knob B , Slide the adjustment arm
either up or down, until desired stride length is achieved then release knob A to engage locking
pin into place.
Note: The number at the top of the indicator, which is on the side, will display the current stride
length of the unit.
Step 3:
Tighten knobs A & B by turning them clockwise to lock them into place.
Repeat steps 1 thru 3 to adjust stride length on the other side.
WARNING: To prevent personal injury, make sure that both the right and left sides of
the unit are set to the same stride length. Every time a user worksout, it is his/her
responsibly to make sure that the knobs on both sides are securely locked.
STEP 1-Loosen STEP 2-Adjust STEP 3-Lock
A
HOLD
B
HOLD
ADJUST