LifeCore Fitness LC-CD500, Руководство пользователя

Страница: 7 / 33

7 | P a g e
Assembly Figure 1
Getting Started
The LifeCore Fitness LC-CD500 Elliptical will require some assembly. Unpack the box in a clear
location, remove all packaged parts from the box and lay each part out on the floor. Double
check all packaging material for missing pieces, do not dispose of any packing material until
assembly is complete and unit is working properly. The final location of the machine should be
placed on a clean level surface near an electrical outlet.
Hardware Bags - Locate all hardware bags for assembly. Bags will be Labeled Figure 1
through Figure 11 , with the exception of Figure 8 . Tools have been provided to assist with
product assembly.
If you are missing any parts, assembly bags or need assistance with assembly please call
LifeCore Fitness at 1-888-815-5559.
FIGURE 1
Note:
Ensure that all wires are properly
connected inside console tube. Be
careful to not
pinch wires .
Note: Do not tighten screws until
you have fully completed Figure 2.
¾
Locate bag labeled Figure 1 .
¾
Locate console tube.
¾
Slide console tube into main
frame.
¾
(See Figure 1) Connect upper
console wire to lead wire assembly.
¾
Secure console tube by using
Qty. three M10*1.5-80mm hex
head screws extending them
through the holes on the frame
and console tube. Use Qty. three
10*20 washers and Qty. three
M10*1.5 crown nuts to lock
M10*80mm hex head screws.
¾
Use Qty. three M10*1.5-120 hex
screws to secure the front of the
console tube to the main frame.