Page | 9
Step 5:
Tool Needed:
None.
1) Locate bag labeled
Figure 5
2) Locate the right and left Handrail Linkage
Assemblies
.
3) (
See Figure 5
) Unscrew the T-grip and
discard the plastic space washer. Slide
the left handrail linkage assembly on to
the adjustment arm frame.
4) Put washer & T-grip back in place and
tighten the T-grip.
5) Repeat for right Side.
Step 6:
Tools Needed:
6mm Allen wrench: 2JC7
Note: Additional help may be needed to help
align holes on top and bottom.
1) Locate bag labeled
Figure 6
.
2) (
See Figure 6
) Lift and place left handrail
linkage assembly onto shaft sleeve and
align holes. Additional help may be
needed to help align holes. Secure
linkage to unit using Qty four washers &
M8x1.25-12 hex bolts, two on top and two
on the bottom.
3) Use a 6mm Allen wrench to tighten the
M8x1.25-12 hex bolts on top and bottom
as tight as possible to prevent the bolts
from coming loose.
4) Repeat same steps for right side.
