Life technologies invitrogen Neon Скачать руководство пользователя страница 20

Страница: 20 / 52

General Guidelines

Recommended
Kits

To use the Neon

™

device for electroporation of mammalian cells, you need to

purchase the Neon

™

Kits from Invitrogen. Ordering information is on page 38.

Do not

use any other kits with the unit.

ENDA

To obtain the best results, follow these recommendations:



Based on your initial results, you may need to optimize the electroporation

parameters for your cell type and DNA/siRNA. A preprogrammed 24-
well optimization protocol is included in the device for your convenience.



Before using the device with your samples, ensure that you are able to

insert and use the Neon

™

Pipette and Tip correctly into the Neon

™

Pipette

Station (see page 14 for details).



Wear gloves, laboratory coat, and safety glasses during electroporation.



Always use the Neon

™

device with Neon

™

Kits for electroporation of

mammalian cells.



The Neon

™

Transfection System is compatible for use with most

mammalian cells including primary and stem cells.



Use high quality DNA and siRNA to obtain good transfection efficiency.



Follow the guidelines on pages 16–17 for cell preparation.



Use an appropriate GFP (green fluorescent protein) construct or siRNA

control (see next page for details) to determine transfection efficiency.



Discard the Neon

™

Tips after 2 usages and Neon

™

Tubes after 10 usages as

a biological hazard. We strongly recommend changing tube and buffer
when switching to a different plasmid DNA/siRNA or cell type.



Visit www.invitrogen.com/neon for a library of electroporation protocols

for commonly used cell types.

Recommended
Buffers

The Neon

™

Kits contain two Resuspension Buffers. Use the appropriate

Resuspension Buffer based on the cell type as below. The cell-specific Neon

™

transfection protocols available on

www.invitrogen.com/neon

indicate the

type of Resuspension buffer for use with each cell type.

Resuspension Buffer R:

Use Resuspension Buffer R with

established adherent and suspension cell

lines

such as 3T3-L1, HEK293, Cos7, C2C12, HeLa, HCT-15, PC-12, MDCK,

Raw264.7, U-2OS, CEM, HL-60, K-562, Jurkat, LCL, Ramos, U-937, as well as

primary adherent cells

such as neuronal cells, stem cells, hepatocytes,

HUVEC, macrophage cells, dendritic cells.

Resuspension Buffer T:

Use Resuspension Buffer T with

primary blood-derived suspension cells

such

as T-cells, B-cells, NK cells, PBMC, monocytes.

Continued on next page

Содержание invitrogen Neon





















































Результаты поиска

Содержание invitrogen Neon

Отзывы:

Похожие инструкции для invitrogen Neon

Бренды по названию

Популярные бренды

Life technologies invitrogen Neon, Руководство пользователя

Результаты поиска

Содержание invitrogen Neon

Отзывы:

Похожие инструкции для invitrogen Neon

Бренды по названию

Популярные бренды