Life Span C7000i, Руководство пользователя

Страница: 11 / 36

A. Pull the seat post adjustment knob (M) and
Step 2: Seat Post Assembly
insert the seat post (3) into seat post
tube (L). The holes in the seat post should
be pointing toward the rear of the bike.
B. When the desired height is reached, release
the seat post adjustment knob (M) to allow
the locking pin to engage.
A. Place the seat (4) over the seat mount post (N).
Step 3: Seat Assembly
B. A
is centered with the upper console mast
bracket (C) and
lign the seat (4) so the front of the seat is
C. S
on each side of the seat mounting bracket (O)
under the seat (4).
ecurely tighten the pre-installed nut (23)
11
M
3
L
4
23
N
O
Note: In order to complete Step 4 and 5,
the seat post needs to be set to the highest
level. Adjust the seat post so the locking pin
clicks into the bottom hole.
Step 1: Remove Components from Box
B. Locate the hardware bag.
C7000i
Interactive Upright Cycle
C