Troubleshooting:
Problem
Possible Cause
Solution
Low sound level
Source (Tablet, Mobile Phone, Laptop, etc.)
volume too low.
Battery dead
Adjust source volume
Charge the battery
Sound distorted
Battery nearly dead
Charge the battery
Bluetooth doesn’t pair
Bluetooth not turned on either on speaker
or source device (mobile phone, tablet,
computer etc)
Speaker already paired with another device
Turn on Bluetooth mode on both speaker and
the source device
Unpair the existing source device and pair
speaker with new source device
No sound at all
Source device (tablet, mobile phone, laptop.)
turned off.
Speaker turned off
Source device volume is low
Media paused on the source device
Turn the source device on
Turn the speaker on
Adjust volume at source
Play media from source
Care and Maintenance
Clean the unit with a soft, damp cloth. Never use chemicals or
hard abrasives.
Keep this unit away from wet or damp surroundings.
The crossed out wheelie bin symbol on this item indicates that
this product needs to be disposed of in an environmentally
friendly way when it becomes of no further use or has worn
out. Contact your local authorities for details of where to take
the item for re-cycling.
Note: iPod and iPhone are trademarks of Apple Inc,
registered in the US, and other countries.
FCC Instructions
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the product.
NOTE:
This product has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This product generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If the
product does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
The device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
