1. Speaker: Sound output
2. Volume “+” button: Short press skip to next track Long press
to increase the volume
3. Play / Pause button: Play / Pause / Answer phone call / End
phone call / Redial / Disconnect Bluetooth
4. Volume “–“ button: Short press skip to previous track Long
press to decrease the volume
5. Microphone: Microphone for hands-free phone calls
6. USB charging port: Charging the speaker
7. On/Off switch: Switch on / off
8. Suction cup: Stick on flat & smooth surface walls & glass
9. LED indicator: Show on/off, pairing and charging status
10. USB charging cable: Charging the speaker
(Note: A beep sound will alert when minimum or maximum
volume is reached)
INSTRUCTIONS FOR USE
Charging the unit
For best results, fully charge the unit before first use.
1. Connect the USB charging cord (included) to the charging
port located at the back of the speaker and insert the other end
into a USB port of your computer or similar power source.
2. The LED at the bottom of the unit turns red when the battery
is being charged. Once it is fully charged, LED will turn off. It will
take around 2~3 hours to fully charge the Battery.
Turn On/Off the Speaker
Turn the speaker On/Off using the On/Off button at the back of
speaker.
Turn the speaker to Bluetooth pairing mode -
1. Switch the On/Off button to on position, located at the back
of speaker.
2. The Blue LED will begin to blink, indicating it is in pairing
mode.
(
Note: If you have paired to the speaker before, then the
speaker will pair automatically with the last device it
connected)
Pairing your device with Bluetooth Speaker
Your speaker can wirelessly stream audio from any Bluetooth
enabled device within the range of 33 Feet. Simply follow the
below steps.
1. Turn ON the speaker and the Blue LED light will begin to
blink.
2. Turn on the Bluetooth on your Mobile Phone, Tablet or
Computer
3. It will search for Bluetooth devices
4. The pairing name of our Bluetooth Speaker is “SL SUCTION
SPKR”, Pair it with this device.
5. If required, enter the password ‘0000’ to confirm and finalize
pairing.
6. Once paired successfully, the LED turns to solid blue.
7. If you fail to pair it or you want to pair it with a new device
please follow the steps outlined above.
Select your favorite song at the Source device (mobile phone,
tablet, computer etc) and play it through the speaker
(
Note: Long press play/pause button of the speaker will
disconnect the Bluetooth with your connected device. You
can pair your speaker with only one device at a time. Please
unpair the speaker with existing device in order to pair it
with another one.)
Answer phone call / End phone call / Redial
(When Speaker is
paired using Bluetooth):
˙
On receiving an incoming call, the speaker will prompt you
with the caller’s number.
˙
Short press the play/pause button to answer the call.
˙
Short press the play/pause button again to end a call.
˙
Short press the play/pause button twice to redial the last
called number.
Do’s and Don’ts
˙
Do not play music at excessive levels as damage to hearing
and/or equipment may result.
˙
Do not use outdoors in wet or in damp surroundings.
˙
Use suction cup to stick only on flat and smooth surfaces.
Suction cup doesn’t stick on some of the surfaces.
Specification
Frequency range: 150Hz – 20KHz
Power : 2 W
Speaker size: 1.6 inch
Play time: Up to 1.5 ~ 2 Hours
Charge Voltage: DC5V (USB)
Bluetooth Range : 33 Feet
(Note: Battery life & charging time may vary based on usage
& types of devices used)
