Life Ionizers M9 UC Next Generation, Руководство пользователя

Страница: 24 / 49

www.LifeIonizers.com/Support
21
75
M9/M9 UC NG
www.LifeIonizers.com/Support
25
75
M9/M9 UC NG
www.LifeIonizers.com/Support
1. Turn off power to the ionizer and remove the
#2 filter cover located
on the right side when looking at the back of the ionizer (picture 3) .
2. Remove the #2 filter by twisting the filter and then lifting it out of the
ionizer (picture 4) .
3. Remove the clear plastic packaging and dust cover from the bottom
of the scaling filter.
4. Before installing the scaling filter, notice the 2 tabs that lock the
filter in place. They are different sizes. Align the larger tabs.
5. Once you have aligned the tabs on the filter with the ionizer,
press down and twist the filter until it stops (picture 6) .
6. Replace the cover (picture 7) .
7. Turn on the power to the ionizer and apply water pressure to the
machine and then press the “ON/OFF” button to start extracting
water. Immediately select the “PURIFY” button (picture 8) .
8. After the 15 second period of extraction, the water has reached its
most acidic point. Press the “ON/OFF” button to stop the extraction.
For counter top applications, remove the acidic tube from the sink
and fasten it to the ionizer ensuring that the cleaning solution will
not leak out of the ionizer (picture 9) .
9. Now let the unit sit for a minimum of 6 hours. The unit is full of a
citric acid solution that will take many hours to break down the
scale that has built up in your unit. Letting it sit in the unit for over
a 6 hour period is okay and will not harm the ionizer.
10. Once the unit has sat for the recommended time, (leaving scaling
filter in place) press the center “ON/OFF” button and then immedi-
atly select the “PURIFY” button. Let the unit extract water for 3-5
minutes. This step will purge all of the citric solution, along with any
scale, out of the machine.
11. The cleaning process is now complete. Remove the scaling filter and
throw it way or recycle it and reinstall a #2 filter.