background image

19

Declaration of conformity

under Directive 98/37/EC, appendix II, part B (Manufacturer’s Declaration of CE Conformity)

L

IFE Home Integration

Via S.Pertini 3/5 

31014 COLLE UMBERTO (TV)

declares that the following product:

RG1R DL S SUPRA MB 230 Vac

 control unit

satisfies the essential requisites established in the following directives:

• 

Low voltage directive 73/23/EEC and subsequent amendments,

 

Electromagnetic compatibility directive 89/336/EEC and subsequent amendments,

 

Radio and telecommunications equipment directive 1999/5/EC and subsequent amendments.

and satisfies the following standards:

 

EN 12445:2000   

Industrial, commercial and garage doors and gates – Safety in the usage of motorised doors –

 

 

 

 

testing methods

 

EN 12453: 

  

Industrial, commercial and garage doors and gates – Safety in the usage of motorised doors –

 

 

 

 

Requisites

 

EN 60204-1:1997  

Machinery safety – Electric equipment of the machine – Part 1: general rules.

 

EN 60950  

 

Information technology equipment - Safety - Part 1: General requisites

 

ETSI EN 301489-3:2001  Electromagnetic compatibility for radio equipment and appliances.

 

EN 300220-3:2000 

Radio equipment and systems – short band devices – Technical characteristics and testing methods for

 

 

 

 

radio apparatus with a frequency of 25 to 1000 MHz and powers of up to 500mW.

The Manufacturer also declares that it is not permitted for the abovementioned components to be used until such time as the 

system in which they are incorporated is declared conform to directive 98/37/EC.

 COLLE UMBERTO ____________         

 

 

Name of Signor:   

 

MICHELE RUI

 

 

 

 

 

 

Position:  

 

 

 PRESIDENT

 

 

 

 

 

 

Signature: 

Содержание RG1R DL S SUPRA MB 230 Vac





















Отзывы: