7
ASSEMBLY INSTRUCTIONS
1. Front and Rear Stabilizers Installation
Position the Front Stabilizer (5) in front of the Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (5) onto the front curve of the Main Frame (1) with two M8x70
Bolts (31), two Ø8xØ25 Big Curve Washers (33), and two M8 Cap Nuts (34). Tighten cap
nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Position the Rear Stabilizer (6) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (6) onto the rear curve of the Main Frame (1) with two M8x70
Bolts (31), two Ø8xØ25 Big Curve Washers (33), and two M8 Cap Nuts (34). Tighten cap
nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
(31) Bolt M8x70
4 PCS
(33) Big Curve Washer
Ø8xØ25
4 PCS
(34) Cap Nut M8
4 PCS
Multi Hex Tool with Phillips Screwdriver
S13, S14, S15
Tool:
Содержание 20460A
Страница 7: ...6 OVERVIEW DRAWING ...