Smith Machine PL06 Unpacking & Assembly Instructions
4
1
2
3
Person 1- Holds right side
Person 2- Holds left side
Person 3- Moves around and assembles
At this stage, three people are required to uncrate the PL06 because the sides are very
heavy and not stable until they are bolted to the front and back braces. Throughout these
instructions, Person 1 refers to the person who holds the right side. Person 2 refers to the
person who holds the left side. Person 3 refers to the person who moves around and
uncrates.
WARNING:
THE STEP BELOW REQUIRES THREE PEOPLE. SOMEONE NEEDS TO
BE HOLDING EACH SIDE OF THE PL06 UNTIL THE BACK AND FRONT BRACES
HAVE BEEN SECURED TO THE SIDES. THE SIDES WILL BE LOOSE AND FREE TO
FALL WHEN THE LAG BOLTS FROM THE SHIPPING CRATE HAVE BEEN
REMOVED.
3. Remove the upper shipping board.
With Person 1 holding the right side and Person
2 holding the left side, Person 3 will remove the upper shipping board (shown in
Unpacking Figure 4) using a ½” socket wrench. Discard the board, lag bolts, and the
protective fabric scraps.
Unpacking Figure 4. Removing the upper shipping board.
